Sunday, November 8, 2009

Repainting the Beach Cruiser. Part I

So inspiration wriggles its way into my head at all sorts of crazy times. The other day I was out in the shed and I happened to look over at my beach cruiser bicycle and think... that would look really sweet with a new paint job... The wheels in my head started turning and my hands got to work. It was very much a learning process and I thought I'd share the experience for any one else who gets this sort of wild inspiration for such a unique canvas.
__________________________________________________________
The Original Bike

The first task was to remove all of the stickers using a razor blade and some sort of sticker remover chemical to get all the glue off. I also cleaned the entire bike using some soap and water.

remove all stickers and clean it up

From there the fun really begins, I took the bike apart as much as possible removing everything that I could. A couple of key tips here:


- Take pictures as you disassemble so that you can reference them when you put it back together.

- Keep parts separated in Ziploc bags or some other sort of containers, it may also be helpful to label these parts bags (eg: shift assembly), and put them somewhere you'll remember later.


Take lots of pictures when you disassemble the bike.

Materials I used included 400/ 600 grit sand paper, water, soap, paper towels, rags, Acetone, blue painters tape, razor blades, primer, paint, clear coat, and any tools you need to dissemble the bike.

After I disassembled everything I used blue painters tape on anything still attached that I didn't want to paint. Then, I sanded everything with a 400 grain wet sand to remove the glossy clear coat.

After I taped it off and sanded it down, I had to improvise a way to hang the bike so that all paintable surfaces were exposed. With a little creativity I figured out a way to suspend the bike from the ceiling beams of my shed. Since I didn't have a tool to disassemble the chain I taped it off real good and had to figure out a way to suspend it without it touching the frame. Pure trial and error.

Find a good area to paint and string it up, remember to think about over spray.

Next I used acetone to clean the entire surface of the bike, wear gloves for this, and be sure not to touch the bike after you've cleaned it.

I love the smell of Acetone in the morning

Finally I was ready to spray!

Rock N Roll!

Since the bike was 2 toned I decided to go ahead and do a white primer coat to add durability and to make sure the final coat came out nice and even. I used Rustolium primer.

Multiple light coats of primer work best

primed up and ready for paint

After the primer dried off, I used a Rustiolum metallic black paint to coat the entire bike, again using multiple light coats.back in black


After the paint dried off I spot checked the bike for any runs or missed areas. I did find a couple, so I sanded them down and did a little touch up. Then I waited for it to dry one more time, wiped it down with a clean rag, and got read to do the custom painting.

Now I ready to get crazy with the paint job!

2 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. hey look like they are just getting started. There are only a handful of models, but it looks as if they have others ready for production.
    beach cruiser bike

    ReplyDelete